VectorQR

Barcode Contrast & Ink Gain Prepress Checklist

Even a mathematically valid barcode fails at checkout if ink spreads across absorbent paper or prints over low-contrast metallic film. Follow these prepress fundamentals before approving plates.

Code-128 Set B valid (mod-103 checksum: 61).

48.0 mm
ENCODED ISO PAYLOAD (OFFLINE)0 REDIRECTS
PRESS-GRADE-A1
C 0M 0Y 0K 100
48.0 x 11.9 mm
VectorQR Permanent Static Plate
100%
Path Elements
1 merged
Subpath Savings
52 (-42%)
Quiet Zone
10 modules

Technical Prepress Specification

Parameter Standard Value Press Note
Reflectance Contrast Dark K=100% on matte white/light stock Target ISO/IEC 15416 Symbol Contrast >= 70%.
Corrugated Kraft Stock Increase magnification to 120%-150% Compensates for lower brown substrate reflectance.
Transparent Pouches Print opaque white flood under barcode Never rely on dark coffee beans or snacks behind clear film.
Bar Width Reduction 0.02 mm to 0.05 mm per press profile Confirm BWR value with your flexo or offset house.

Press-Check Verification List

  1. Always place an opaque white knockout rectangle covering the full barcode plus quiet zones on transparent or metallic packaging.
  2. Avoid printing barcodes near carton creases, heat-seal crimps, or curved bottle shoulders.
  3. Run closed-loop on-device scan verification on your final proof before approving mass production.